dsat.gov.mo Reissuance of Vehicles Circulation Tax Macao : Transport Bureau

Organization : Transport Bureau
Service Name : Reissuance of Vehicles Circulation Tax
City: Macao/Macau
Country : China

Website : http://www.dsat.gov.mo/
DSAT ePay: https://epay.dsat.gov.mo/Default.aspx?Lang=en

Reissuance of Vehicles Circulation Tax:

This electronic payment service only serves those applicants who have paid for and issued with a Circulation Tax Disc for their vehicles, but the tax disc is lost or seriously damaged.

Related : Transport Bureau Application For Driving Exam Macau : www.statusin.org/11748.html

Motorcycle:
1. Please Input License Plate Number of the Motor Car / Motor Cycle
Ex: Enter MA0123 for MA-01-23,
Enter CM11112 for CM-11112

2. Please enter the last 8 digits of the Chassis Number
Please refer to the location of the Chassis Number shown on the ‘Livrete’ on the right
Note: no need to enter?/?,?-?,?*?,?.?or space
Ex: enter 2F123456 for *WDB202020 2F 123456

3. Verification code

Motor Car:
1. Please Input License Plate Number of the Motor Car / Motor Cycle
Ex: enter MA0123 for MA-01-23,
enter CM11112 for CM-11112

2. Please enter the last 8 digits of the Chassis Number
Please refer to the location of the Chassis Number shown on the ‘Livrete’ on the right
Note: no need to enter?/?,?-?,?*?,?.?or space
Ex: enter 2F123456 for *WDB202020 2F 123456*

3. Verification code

Operation Guide for Practical Driving Test of Moped/Motorcycle for the
Disabled :
I. Off-street test
(1) Preparation

Requirements and procedures :
1) The candidate is to get on the exam vehicle by oneself, without any assistance from others.
2) The candidate should wear the helmet correctly, fasten the chin strap firmly, check that the rear view mirror is at a suitable angle, properly adjust the seat and fasten the safety belt.

(2) Reverse perpendicular parking :
Requirements and procedures :
1) After changing into reverse gear, the candidate should complete the manoeuvre in one continuous motion, during which pauses are allowed but, it is not allowed to change into forward gear to adjust the vehicle’s position. After parking in the parking space, all four wheels of the vehicle must be within the white frame of the parking space. The vehicle body must not overlap the white frame or the pavement.

2) A candidate who failed to meet the above requirements but did not hit the pavement or any obstacles is allowed a second or a third attempt. A candidate who failed all attempts to park successfully will be considered to have failed the test and it will be terminated.

(3) Stop on an incline and then move off
Requirements :
** Stop the vehicle inside the block marked by yellow/white lines. The wheels should not touch the lines. When moving off, the vehicle must be steady and not rolling backwards.

Procedures :
** Release the handbrake;
** Enter the incline and stop the vehicle at a designated spot as instructed by the examiner;
** Moving off.

II. Road Test
(1) Driving and speed control :
** The candidate needs to master a variety of driving techniques in order to cope with different road conditions, such as the correct ways to drive when going uphill and downhill, approaching and leaving junctions or roundabouts.

** The candidate needs to appropriately coordination the handlebars, clutch, throttle and handbrake; to apply both front and rear brakes at the same time when braking.

** The candidate needs to prevent the vehicle from rolling forward or backwards when stopping and, to drive stably without the vehicle swinging to either side.

** When stopping or driving, the candidate should not rev the engine (apply the throttle while in neutral) unnecessarily.